EATON - MV METAL-CLAD SWITCHGEAR (VAC-CLAD)

- ANSI / NEMA / EEMAC / UL / CSA Stds.
- Dimensions (Indoor) 36” Wide x 95” High x 96.25” Depth
- Interrupting Ratings 250, 350, 500 MVA, 40kA, 50kA
- Main Bus Ratings 1200A, 2000A, 3000A, 4000A
- Glass Polyester Insulation System Cycloaliphatic Epoxy Insulation Optional
- Enclosures
- Indoor
- Outdoor Aisle-less
- Outdoor Sheltered Aisle
- Outdoor Common Aisle

Eaton – MV Motor Control Center (Ampgard)

- 15kV maximum voltage.
- 95kV BIL rating using lightning arrestors assembly and contactor rated 75kV BIL.
- UL certification under development.
- 300 – 5000 HP motors.
- SL solid-state control board.
- Top mounted 12” main bus compartment.
- 1000, 1200, 2000 ampere main bus ratings.
- Main bus is insulated copper with tin or silver plating.
- 36W x 92H x 30D.

Eaton - MV Metal Clad Panel Xgear

The Xgear series is metal-clad type switchgear designed, assembled and tested to comply with IEC standard 62271-200. The Xgear series has been comply with all relevant IEC standards and already done pass test by CESI certicate. The Xgear series is safe; reliable and efficient for all indoor application. Metal-Clad Switchgear consist of four compartment:
- CB Compartment
- Bus-bar Compartment
- Cable Connector
- LV Compartment, remember always, metal-clad is metal eclosed type too but metal-enclosed is metal-clad type
- Rated voltage up to 24kV
- Rated current up to 3150A ( Witch Cooling fan for current 3150A)
- Rated interrupting current up to 25kA/3s
- IP 41
- Indoor or outdoor

Eaton – MV Metal Enclosed Panel XIRIA

XIRIA switchgear is a new generation of environmental friendly Ring Main Unit Switchgear for applications up to 24 Kv Medium Voltage Distribution networks. Sustainability becomes more and more important, This criterion has been taken as a starting point for the design in terms Of production and for the entire service life of the switchgear.

Xiria switchgear is manufactured and tested in accordance with the procedures As laid down in ISO 9001-2000. KEMA Registered Quality B.V. checks periodically That these standards are adhered to. In addition, Electric B.V. adheres to ISO 14001.

The system is metal enclosed and air insulated, equipped with load-break switches and circuit breakers for 12 kV-20kA and 24 kV-16kA networks. The nominal current of the load break switch is 630 A. The nominal current of the circuit-breaker is 200 or 500 A.

Key Advantage :
- Maintenance Free
- Low Building Cost
- Internal Arc Proof
- Easy to Install
- Environment safety
- Remote Control Facility
- Highhest quality, Most reliable
- Fully Insulated, Maximum IP 67
- Very compact Design
- Safety

Eaton – LV Motor Control Center Xenergy

The Motor Control Center Xenergy has been realized to the pricese end of meet such requirements. It may be used for :
- Rated coltage up to 690 VAC, 50/60 Hz
- Rated surrent up to 5550A
- Rated short time current up to 100 kA at 1 sec
- Form of separation up to Form 4B
- Degree protection up to IP 55
The Xenergy has been designed in compliance with the following standard met IEC 61439-1-2. Our product already done pass test by DEKRA KEMA international cerificate

Eaton – MV Switchgear Technology RVAC

Based on the design concept of full insulation and fully sealed, all primary parts within RVAC RMU are fully sealed inside the stainless-steel main enclosure, protect to against condensation and external contaminated environment; the protection degree of the main tank body is up to IP68, equipped with Cooper’s waterproofing touchable cable bond, which can provide effective protection against accidental flood in rainy climate.
- Rated Voltage upto 24kv
- Rated current up to 630A
- Rated interrupting current up to 20kA/3s
- Modular cubicle type
- Capacitive voltage detection system for verification of safe isolation from supply
- Feeder earthing by means of make-proof earthing switch
- Low power loss, low maintenance spending, ensuring more reasonable cost investment
- In normal working conditions, gas leakage rate of lower than 1‰ ensures more than 30 years life-cycle
- Indoor or Outdoor

Eaton – LV MOTOR CONTROL CENTRE (F2100)

- ANSI / NEMA / EEMAC / UL / CSA Stds
- Type test of seismic withstand capability
- Protects and monitors Low VoltageElectrical Distribution Systems
- Leader in product innovations
- Major customers include Heavy Industrial,Commercial Users with critical processes, &Critical Power / UPS OEMs
- Highest interrupting ratings up to 200kAIC
- Compact dimension:
  20”W x 90”H x 16” or 21”D (Front Type)
  20”W 90”H 21”D (B k t B k T )20”W x 90”H x 21”D (Back to Back Type)
- Enclosures:
  - Indoor
  - Outdoor Aisle-less
  - Outdoor Sheltered Aisle
  - Outdoor Common Aisle

Eaton - LV SWITCHGEAR (MAGNUM DS)

- ANSI / NEMA / EEMAC / UL / CSA Stds
- Type test of seismic withstand capability
- Protects and monitors Low VoltageElectrical Distribution Systems
- Leader in product innovations
- Patented designs up to 600V, 10000A cont current
- Major customers include Heavy Industrial, Commercial Users with critical processes, &Critical Power / UPS OEMs
- Highest interrupting ratings up to 200kAIC
- Short time 30 cycle withstand ratings up to100kA
- Four ACB in one cell cubicle

Eaton - Cast Resin Dry Type Transformer

Key Advantage :
- Highest quality, most reliable
- Lower losses, lower noise, lower partial discharge
- Competitive lead time & cost effective
- Maintenance free, low installation cost
- Environment safety and lower liability because it is low partial discharge, flame resistance matrial and not contain fluid

EATON – BUSDUCT

Non-Segregated Phase Bus Duct

- 600 V through 38 kV
- 1200 A through 5000 A
- Copper bus bar
- 130 degree Class B epoxyinsulation
- Silver-plated contact surfaces
- Up to 63 kA short circuit withstandratings, 170 kA peak
- Aluminum, steel and stainlesssteel enclosures
- Indoor, outdoor and dust-tightconstruction
- Accordance with ANSI/IEEE standard C37.23

EATON – BUSDUCT

XAP Series Busduct

The advantages of XAP series busduct summarized:
- Rated Voltage Up to 660 V
- High power busduct up to 6300 A
- Verified by testing according to IEC439-1/2
- Applicable for vertical or horizontal installation
- Complete range of tap-off units with Eaton devices and wide range of options and accessories
- No de-rating in line with current standards
- IP65 for feeder type, IP 54 for plug-in type
- Ease of installation
- Fit-for-purpose for Eaton switchboards and panelboards
- Superior electrical services and worldwide references for busduct applications by Eaton

EATON – BUSDUCT

Pow-R-Way III Busway

- 225 – 4000 A aluminum
- 225 – 5000 A copper
- Indoor and sprinkler proof plug-in
- Indoor and outdoor feeder
- Three-phase, 240 V up to 600 V
- 100% and 200% neutral options
- 50% housing ground, 50% internalground, 50% isolated ground and100% ground options
- ULT 857, NEMAT, CSAT C22.2 No.27-94, IEEE and ANSI
- Seismic certified to UBCT andCalifornia Building Code to exceedZone 4
- IEC standards:
  - EN 60439-2: 1987 Amendment 1 1991
  - EN60439-1: 1992
  - IEC 60529 IP ratings: IP40 to IP66